Last weekend, I got to painting the Mr potato Head eyes. I lucked out and found a Testers model paint that almost EXACTLY matched the MPH toy.

Progress_2016-Aug7_0001_IMG_1149.JPG

I hand painted the eyebrow and then cut black vinyl for the pupil. I did attempt to paint the pupil but it proved nearly impossible to line up the hole on that curved surface. The vinyl allowed me to reposition it until it was right.

Progress_2016-Aug7_0002_IMG_1150.JPG

Here they are attached to the toy. The two versions of the eyes allow you to mix and match them for different expressions. The eye pegs are off center by necessity so with some expressions have the eyes too close.

Progress_2016-Aug7_0003_IMG_1152.JPG

Progress_2016-Aug7_0004_IMG_1153.JPG

Progress_2016-Aug7_0005_IMG_1154.JPG

Progress_2016-Aug7_0006_IMG_1155.JPG

I also finished painting the mouth insert for my life-size Michelangelo.

Progress_2016-Aug7_0008_IMG_1161.JPG

Mouth glued in place.

Progress_2016-Aug7_0009_IMG_1163.JPG

I finished Combat Carl’s head, combined both halves and prepared to add thickness to the mesh for printing.

Progress_2016-Aug7_0013_Screen Shot 2016-08-06 at 2.40.59 PM.png

It was then that I noticed that Carl’s hairline was wrong. I made that correction and few other minor tweaks.

Progress_2016-Aug7_0015_Screen Shot 2016-08-07 at 11.19.24 AM.png

Progress_2016-Aug7_0014_Screen Shot 2016-08-07 at 11.19.13 AM.png

Back when the model was still primitive, I saved a low polygon insert. I flipped the polygons (yes, it makes a difference as to which way they “face”), positioned it inside the new model and then combined the geometry.

Progress_2016-Aug7_0017_Screen Shot 2016-08-07 at 11.38.47 AM.png

Here you can see how the two sides are stitched together. Printing it with a 1.5mm shell saves big money.

Progress_2016-Aug7_0018_Screen Shot 2016-08-07 at 11.55.24 PM.png

Tagged with →  

One Response to Progress Weekend August 5-7

  1. hong says:

    i want buy potato eyes
    when u sell ????

Leave a Reply to hong Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Follow

Get every new post delivered to your Inbox

Join other followers: